Enabling SIP extension/user auto creation

Last Updated : Nov 05, 2020 |
The IP Office system can be set to automatically create extension and user entries in its own configuration as each SIP telephone registers with the system. This can speed up installation when installing several devices and then disable the setting once the installation has been completed.
The auto-created users are automatically linked to the IP Auto-create user rights settings. By default that set of user rights has outgoing calls barred.
Other:
Leaving this settings enabled is strongly deprecated. The system automatically disables the settings 24-hours after it is enabled.
  • Not Supported with WebLM Licensing: The auto-create extension/user options are not useable on systems using WebLM licensing.
  • Reboot Required: Note that changing the SIP registrar settings of an IP Office system requires the IP Office system to be rebooted.
Prolog information
Metadata
Keywords:
  1. Auto-creation cannot be enabled until the Extension Default Password has been set. See Setting the default extension password.
  2. Using either IP Office Manager or IP Office Web Manager in offline mode, load the system configuration.
  3. Select SystemSystem or System SettingsSystem.
  4. Select LAN1 or LAN2 as required.
  5. Select the VoIP tab.
  6. Change the Auto-create Extn/User settings to the state required.
  7. Save the configuration back to the IP Office.
Related links
Generic installation process