Configuring the POM Server attribute

Last Updated : Apr 06, 2021 |

About this task

Use this procedure to configure the POM Server attribute through OceanaConfiguration.

Note:

If the Outbound channel is not deployed in your solution, you must skip configuring this attribute.

Procedure

  1. On the System Manager web console, click Elements > Avaya Breeze® > Configuration > Attributes.
  2. On the Attributes Configuration page, click the Service Clusters tab.
  3. In the Cluster field, select Provisioning Cluster.
  4. In the Service field, select OceanaConfiguration.
  5. Locate the OBCService area.
  6. For POM Server, select the Override Default check box and enter the FQDN or IP address of the POM server to be serviced by the OutboundConnector.
  7. Click Commit.

Next Steps

After configuring all the snap-in attributes in a cluster, you must reboot the cluster.