dscp (object tracking)

Last Updated : Nov 06, 2012 |

Sets the DSCP value in the IP header of an RTR operation’s probe packets. Use no dscp to restore the value to the default value of 48.

Prolog information

Metadata

Keywords:

Note:

Run the type command to define the RTR operation’s probing method and the IP address of the remote device before using this command.

Syntax

[no] dscp dscp

Parameter	Description	Possible Values	Default Value
dscp	The dscp value	0-63	48

read-write

rtr, rtr type

To set the DSCP value for RTR 1:

Gxxx-001(config-rtr icmp 1)# dscp 42

Send Feedback