Modem configuration – Console port

Last Updated : Sep 19, 2023 |
Prolog information
Console port configuration for modem use, CLI commands
Root level command
First level command
Description
interface console
Enter configuration context for the Console interface.
async mode interactive
Enter modem mode every time the proprietary modem cable is plugged into the Console port.
async mode terminal
Disable interactive mode on the Console.
async modem-init-string
Change the default modem initialization string.
async reset-modem (Console port)
Reset the connected modem.
ip address
Assign an IP address and mask to an interface.
ip peer address
Change the IP address offered to a requesting calling host during PPP or IPCP connection establishment.
ppp authentication
Configure the authentication method used when starting a client session on the PPP server.
ppp chap-secret
Configure the shared secret used in PPP sessions with CHAP authentication.
ppp timeout authentication
Set the maximum time to wait for an authentication response.
show ppp authentication
Display PPP authentication status.
shutdown (interface)
Disconnect an active PPP session and shut down the modem.
speed (PPP)
Set the PPP baud rate to be used by asynchronous PPP ports.
timeout absolute
Set the number of minutes until the system automatically disconnects an idle PPP incoming session.