Displays information about a specific policy list or all lists.
Prolog information
Metadata
Keywords:
Syntax
show ip active-lists [list_index | list_type]
Parameters
Parameter
Description
Possible Values
Default Value
list_index
The index of the policy list to view
300-499
list_type
The type of list
User level
read-only
Context
general
Example
To display information about all lists:
Gxxx-001(super)# show ip active-lists Interface Name Dir. Type Idx List Name -------------------------------- ---- -------- --- ---------------- FastEthernet 10/3 In ACL 300 Default ACL List FastEthernet 10/3 In QoS 400 Default QoS List FastEthernet 10/3 Out ACL 300 Default ACL List FastEthernet 10/3 Out QoS 400 Default QoS List FastEthernet 10/3 ---- Crypto 901 list #901 Vlan 1 In ACL 300 Default ACL List Vlan 1 In QoS 400 Default QoS List Vlan 1 Out ACL 300 Default ACL List Vlan 1 Out QoS 400 Default QoS List
Output fields
Name
Description
Interface Name
The name of the interface on which the list is operating
Dir.
The direction of traffic on which the list is operating. Options are:
In — The list is operating on incoming traffic
Out — The list is operating on outgoing traffic
Type
The type of list. Options are:
ACL — Access Control List. Controls which packets are authorized to pass through the interface.
QoS — QoS List. Can change the value of the QoS field in a packet.
PBR — Policy-Based Routing List. Determines the routing of packets that match the rules defined in the list.
Crypto — IPSec Crypto List. Provides encryption rules for VPN traffic that needs protection.
Idx
The ID of the list. List IDs must be within the following range:
ACL — 300-399
QoS — 400-499
PBR — 800-899
Crypto — 900-999
List Name
The name of the list, as determined by the name command
