Frame relay encapsulation

Last Updated : Aug 25, 2023 |
Prolog information
Metadata
Keywords:
Frame relay CLI commands
Root level command
First level command
Description
clear frame-relay counters
Clear the frame relay counters.
interface serial
Enter Serial interface or sub-interface configuration mode.
encapsulation
Set the encapsulation mode for a Serial interface.
frame-relay class-dlci
Associate a Virtual Channel with a named QoS or Traffic shaping template (map-class).
frame-relay interface-dlci
Associate a frame relay Virtual Channel with the current interface.
frame-relay lmi-n391dte
Set the number of status enquiry intervals that pass before issuing a full status enquiry message.
frame-relay lmi-n392dte
Set the maximum number of unanswered status enquiries the equipment accepts before declaring the interface down.
frame-relay lmi-n393dte
Set the number of status polling intervals over which the error threshold is counted (the monitored event count).
frame-relay lmi-type
Manually define the type of the Local Management Interface (LMI) to use.
frame-relay priority-dlci-group
Assign Virtual Channels to priority classifications, for supporting traffic separation.
frame-relay traffic-shaping
Turn on or turn off traffic shaping and frame relay fragmentation.
ip address
Configure an IP address and mask for the interface.
map-class frame-relay
Create a QoS template which can later be assigned to DLCIs.
bc out
Configure the committed burst size in bits, for the outbound direction.
be out
Configure the excess burst size in bits, for the outbound direction.
cir out
Configure the Committed Information Rate in bits per second, for the outbound direction.
fragment
Enable FRF.12 fragmentation and configure the fragment size, or disable FRF.12 fragmentation.
show frame-relay map
Display a summary table of frame relay sub-interfaces and DLCIs associated with the sub-interfaces.
show frame-relay pvc brief
Display information on all PVCs known to the device, in table form.
show interfaces
Display interface configuration and statistics for a particular interface or all interfaces.
show map-class frame-relay
Display the map-class frame relay table.
show traffic-shape
Display traffic shaping and Frame Relay Traffic Shaping configuration information.
show traffic-shape-queue
Display information about the real-time status of traffic-shaping and Frame Relay Traffic Shaping queues.
show traffic-shape-statistics
Display traffic shaping and Frame Relay Traffic Shaping statistics.