Sets the maximum queue delay for which to estimate the high priority queue size necessary to meet the queueing delay for specific VoIP codec parameters. Use no voip-queue-delay to return the maximum queue delay introduced for VoIP traffic by egress queueing to the default value of 20ms.
Prolog information
Metadata
Keywords:
Note:
This command is not applicable for an interface on which Frame-Relay Traffic-Shaping is enabled. Instead, this command is now applicable under map-class frame-relay context, to control the specific DLCI queueing parameters.
The maximum queue delay, in milliseconds, for which to estimate the high priority queue size. The queue delay is the amount of time that voice traffic is allowed to wait in the queue.
1-1000
20
codec
The codec for which to estimate the high priority queue size
g711mu
g711a
g729
g729a
g729b
g729ab
g723-5.3
g723-6.3
g729
frames-per-packet
The number of codec frames per IP packet for which to estimate the high priority queue size
1-6
2
User level
admin
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L2, USP PPP L2, USP PPP L2-L3), FastEthernet (L2, L2-L3) - when traffic shaping is configured, Serial (DS1 FR L2, USP FR L2) - when Frame Relay Traffic Shaping is not configured, map-class frame-relay, Dialer (L2, L2-L3)
Note:
This command is also used in Serial and WAN FastEthernet context when traffic shaping is configured.
Example
To set the maximum query delay to 30 milliseconds:
