Lists the administered DS1 parameters for SLS for this trunk interface.
Prolog information
Metadata
Keywords:
Syntax
show
User level
read-write
Context
sls > ds1
Example
To list the administered DS1 parameters for this trunk interface:
Gxxx-001(sls-ds1-<port address>)# show Name = ‘Willow Steet 2’ DS1 Rate Signaling Channel Connect Interface Side Protocol Ver Bearer Cmpd Ltm ---- ---- --------- ------- ------- --------- ---- -------- --- ------ ---- --- v3 1544 isdnpri seq network user a country1 a speech ulaw no
Output fields
Field
Description
DS1
The physical module address on the gateway
Rate
The maximum transmission rate for the DS1 facility. Possible values:
1.544 Mbps (T1)
2.048 Mbps (E1)
Signaling
The signaling mode for the DS1 facility. Possible values:
cas
robbedbit
idsnpri
isdnextshowmgc
Channel
The channel-numbering method for B-channels on an E1 interface. Possible values:
seq (sequential codes of B-channels 1-30 in the ISDN Channel Identification IE)
tslot (timeslot method)
Connect
The equipment at the far-end of the DS1 link. Possible values:
host (data application – computer or server)
lineside (terminal equipment – video multiplexer)
network (central office)
pbx (private communication system – another pbx)
Interface
The glare-handling convention if the equipment at the far-end of the link has been administered as pbx . Possible values:
network (Non-QSIG calls)
user (Non-QSIG calls)
peerMaster (QSIG calls)
peerSlave (QSIG calls)
Side
The glare-handling condition if the equipment at the far-end of the link has been administered as peerMaster or peerSlave. Possible values:
a
b
Protocol
The ISDN Layer-3 country protocol type
Ver
The protocol version, for countries whose public networks allow for multiple ISDN Layer-3 country protocols for ISDN Primary Rate service
Bearer
The Information Transfer Rate field of the Bearer Capability IE. Possible values:
3khz (3.1kHz audio encoding)
speech (speech encoding)
Cmpd
The far-end companding method. Possible values:
alaw (A-law companding)
ulaw (U-law companding)
Ltm
Whether to increase the duration of the T303 (call establishment) timer. Possible values:
yes (the T303 timer is extended from 4 seconds to 13 seconds)