show rtr configuration

Last Updated : Oct 26, 2015 |
Displays RTR configuration values, including all defaults for a specific RTR operation. If no RTR ID is specified, values for all RTR operations are displayed.
Prolog information
Metadata
Keywords:

Syntax

show rtr configuration [rtr-id]

Parameters

Parameter
Description
Possible Values
Default Value
rtr-id
RTR ID
1-30

User level

read-only

Context

general

Examples

To display all RTR configuration values:
Gxxx-001(super)# show rtr configuration
RTR#  1
-------
Type: ipIcmpEcho
Target Address: 2.2.2.1
Frequency (Milliseconds): 5000
Wait Interval (Milliseconds): 5000
Success Retries: 1
Failure Retries: 5
DSCP: 48
Source Address: 149.49.70.119
Next-Hop interface:FastEthernet 10/3
Next-Hop Mac Address: 00:04:0d:17:28:4b
RTR#  2
-------
Type: tcpConnect
Target Address: 2.2.2.1
Target Port: 21
Frequency (Milliseconds): 5000
Wait Interval (Milliseconds): 5000
Success Retries: 1
Failure Retries: 5
DSCP: 48

Output fields:

Field
Description
Type
The configured RTR type. The supported types are:
  • IP/ICMP Echo
  • TCP Connection
Target Address
The destination IP address of the probe packet. That is, the address being monitored
Frequency
The time in milliseconds between successive RTRs
Wait Interval
The amount of time in milliseconds to wait for a response to a probe before considering it an unanswered probe
Success Retries
The number of successive answered probes that will change the status of the RTR operation from down to up
Failure Retries
The number of successive unanswered probes that will change the status of the RTR operation from up to down
DSCP
The DSCP value of the probe packet
Source Address
The source IP address of the probe packet (displayed only if configured)
Next-Hop Interface
The interface through which to route the probe packet, bypassing the normal route (displayed only if configured)
Next-Hop Mac Address
The next hop mac-address for Ethernet interfaces