|
clear controller counters
|
|
Reset the controller counters.
|
|
controller
|
|
Enter configuration mode for a specific controller.
|
|
cablelength long (T1)
|
Set transmit and receive levels for a cable longer than 655 feet.
|
|
cablelength short (T1)
|
Set transmit levels for a cable of length 655 feet or shorter.
|
|
channel-group
|
Create a channel group logical interface for a PPP or Frame Relay session.
|
|
clock source
|
Set the clock source for an E1 or T1 controller.
|
|
fdl
|
Define the type of Facility Data Link loopback that the remote line is requested to enter.
|
|
framing
|
Set the frame type for an E1 or T1 data line.
|
|
linecode (E1)
|
Set the type of line-code transmission for the E1 line.
|
|
linecode (T1)
|
Set the type of line-code transmission for the T1 line.
|
|
loopback
|
Activate or deactivate loopback mode for an E1 or T1 line.
|
|
remote
|
Reset the far end counters on a T1 line.
|
|
ds-mode
|
|
Set the mode of the controller to e1 or t1.
|
|
interface serial
|
|
Enter Serial interface or sub-interface configuration mode.
|
|
ip address
|
Configure the IP address and subnet mask of the interface.
|
|
show controllers
|
|
Display status information about a controller interface.
|
|
show controllers remote
|
|
Display controller statistics from a peer station.
|
|
show ds-mode
|
|
Display the current mode of the controller.
|
