set interface

Last Updated : Nov 06, 2012 |
Specifies the glare-handling convention for a DS1 or BRI link in SLS. This command also determines the polarity of the ISDN Layer 2 (LAPD) protocol operation.
Prolog information
Metadata
Keywords:
Note:
For a DS1 circuit, this command specifies the glare-handling convention for the set connect command that has been administered as
This command is valid only for a DS1 or BRI circuit.

Syntax

set interface glare-mode

Parameters

Parameter
Description
Possible Values
Default Value
glare-mode
The glare-handling convention for a DS1 or BRI link.
For non-QSIG calls:
  • network – If the gateway is connected to a host computer and encounters glare, it overrides the far-end
  • user – If the gateway is connected to a public network and encounters glare, it releases the circuit
For QSIG calls:
  • peerMaster – SLS overrides the other end when glare occurs
  • peerSlave – SLS releases the circuit when glare occurs
network
user
peerMaster
peerSlave
user

User level

read-write

Context

sls > ds1
sls > bri

Example

To specify the glare-handling convention as network:
Gxxx-001 (sls-ds1-<port address>)# set interface network