Sets the source IP address for an RTR operation. Use no source-address to restore the default setting, which is to use the output interface’s IP address.
Prolog information
Metadata
Keywords:
Note:
Run the type command to define the RTR operation’s probing method and the IP address of the remote device before using this command.
By default, the source-address command is disabled, and RTR operations use the output interface’s address.
Syntax
[no] source-addressip-address
Parameters
Parameter
Description
Possible Values
Default Value
ip-address
The IP address to serve as the source IP address for all RTR operations
User level
read-write
Context
rtr, rtr type
Examples
To set the source IP address for RTR operations as IP address 135.64.102.5:
