Available contexts

Last Updated : Aug 25, 2023 |
Prolog information
Metadata
Keywords:
The following table describes all the contexts in the CLI. The Context column provides the command to type in order to enter the context. The CLI prompt column is the prompt that you see once you have entered the context.
List of CLI Contexts
Context
Description
CLI prompt
Banner login
For editing a text message that appears before users login.
(login)#
Banner post login
For editing a text message that appears after users login.
(post-login)#
certificate-options
TLS Certificate validation options.
(certificate-options)
CNA testplug
Configuring a CNA testplug.
(cna-testplug 1)#
composite-operation
Security ACL match action.
(ACL 301/CompOp 2)#
composite-operation
QoS policy list match action.
(QoS 401/CompOp 2)#
crypto isakmp policy
Create an ISAKMP policy (VPN).
(config-isakmp:1)#
crypto ipsec transform-set
Create an IPSec transform set (VPN).
(transform:ts1)#
crypto isakmp peer
Create an ISAKMP peer (VPN).
(peer:149.49.70.1)#
crypto isakmp peer-group
Create an ISAKMP peer group (VPN).
(peer-grp:vpn.avaya.com)#
crypto map
Create a crypto map (VPN).
(crypto:1)#
dscp-table
QoS policy list DSCP to CoS map.
(QoS 401/dscp 63)#
Interface Console
Configuring the Console interface.
(if:Console)#
Interface USB
Configuring the USB interface.
(if:USB-Modem)#
Interface Serial
USP, E1/T1.
(if:serial 2/1)#
Interface Loopback
The loopback virtual interface.
(if:loopback 1.0)#
Interface VLAN
Branch Gateway interfaces to VLANs.
(if:vlan 1)#
Interface FastEthernet
An Ethernet port connected directly to the router.
(if:fastEthernet 20/1)#
Interface Tunnel
A GRE Tunnel interface. A GRE tunnel is a virtual point-to-point link between two routers at two ends of an Internet cloud.
(if:Tunnel 1)#
Interface DIaler
A Dialer interface.
(if:Dialer 1)#
ip Access-Control-List
Security Access list.
(ACL 301)#
ip capture-list
Configure a capture list.
(Cap 501)#
ip capture-list/ip-rule
Configure a capture list rule.
(Cap 501/ip rule 22)#
ip dhcp pool
Configure a DHCP pool.
(DHCP 5)#
ip dhcp pool/option
Configure a DHCP option.
(DHCP 5/option 19)#
ip dhcp pool/vendor-specific-option
Configure a vendor specific DHCP option.
(DHCP 5/vendor specific 1)#
ip next-hop-list
Configure a next hop list.
(next hop list 1)#
ip pbr-list
Configure a PBR list.
(PBR 801)#
ip pbr-list/ip-rule
Configure a PBR list rule.
(PBR 801/ip rule 22)#
ip-rule
Security ACL list entry.
(ACL 301/ip rule 4)#
ip QoS-list
QoS policy list.
(QoS 401)#
(Log in as Privileged User)
Root Read Write context.
#
(Log in as Supervisor)
Root Admin context.
(super)#
(Log in as User)
Root Read Only context.
>
map-class frame-relay
Create a QoS template.
(map-class)#
Router OSPF
OSPF routing protocol configuration.
(router:ospf)#
Router RIP
RIP routing protocol configuration.
(router:rip)#
rule
QoS policy list entry.
(QoS 401/rule 4)#
rtr
Enter RTR configuration mode.
(rtr icmp 1)#
sls
Configure Standard Local Survivability (SLS).
(sls)
sls/station
Configure SLS stations.
(sls-station <extension>)
sls/trunk-group
Configure SLS trunks.
(sls-trunk-group-<tgnum>)
sls/ds1
Configure SLS DS1 parameters.
(sls-ds1-<port-address>)
sls/sig-group
Configure SLS signaling-group parameters.
(sls-sig-group <sgnum>)
sls/bri
Configure SLS BRI parameters.
(sls-bri <slot-address>)
sls/dial-pattern
Configure SLS dial-pattern parameters.
(sls-dial-pattern <dialed-string>)
sls/incoming-routing
Configure SLS incoming-routing parameters
(sls-incoming-routing <tgnum>)
ssh-client-configuration
SSH Client configuration options.
(ssh-client-configuration)
ssh-server-configuration
SSH Server configuration options.
(ssh-server-configuration)
track
Configure an object tracker.
(track rtr 1)#