Verifying the AE Service IP (Local IP) settings

Last Updated : Jun 10, 2026 |

Procedure

  1. Log in to AE Services Management Console.
  2. From the main menu, select Networking > AE Service IP (Local IP).

    The settings on the AE Services IP (Local IP) page should match the settings you specified during initial deployment.

    • If you set up a single NIC configuration, the IP settings in the Client Connectivity, Switch Connectivity, and Media Connectivity fields should be the same.

    • If you set up a dual NIC configuration, the IP settings should match the settings you specified during initial deployment.

      Note:

      The private network segment should contain one subnet; this is the only supported configuration. You can configure any default gateway for public and private network segments. However, Avaya recommends using a public gateway as the default gateway to enable access to AE Services through both public and private network segments. After deployment, you must add static routes through CLI to make AE Services accessible from the private network segment.