For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
|
Command
|
Description
|
|
set utilization cpu
|
Enable CPU utilization measurements
|
|
show faults
|
Display information about currently active faults
|
|
show image version
|
Display the software version of the image on both memory banks of the device
|
|
show mg list_config
|
Display the current hardware and firmware configurations for the installed Branch Gateway equipment
|
|
show mgc
|
Display information about the Media Gateway Controller with which the Branch Gateway is registered
|
|
show module
|
Display brief information about the media modules installed in the Branch Gateway
|
|
show restart-log
|
Display information about the last time the Branch Gateway was reset
|
|
show system
|
Display information about the Branch Gateway
|
|
show temp
|
Display the device temperature
|
|
show timeout
|
Display the amount of time in minutes the terminal remains idle before timing out
|
|
show utilization
|
Display information about CPU and memory usage on the Branch Gateway
|
|
show voltages
|
Display power supply voltages
|
