AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
No results found
Search suggestions:
- Use fewer tags and filters.
- Use different search terms.
Filters
AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
No results found
Search suggestions:
- Use fewer tags and filters.
- Use different search terms.
Filters
Administering Avaya G430 Branch Gateway
Table of Contents
Type to filter navigation items by title
Summary of OSPF commands
Last Updated : Jul 17, 2020 |
Prolog information
Metadata
Keywords:
For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
|
Root level command
|
Command
|
Description
|
|---|---|---|
|
interface (dialer fastethernet| loopback|tunnel|vlan)
|
Enter the Dialer, FastEthernet, Loopback, Tunnel, or VLAN interface context
|
|
|
bandwidth
|
Set the bandwidth parameter manually for this interface
|
|
|
ip ospf authentication
|
Specify the authentication type for an interface
|
|
|
no ip ospf authentication
|
Remove the authentication type for an interface.
|
|
|
ip ospf authentication-key
|
Configure the interface authentication password
|
|
|
no ip ospf authentication-key
|
Remove the OSPF password
|
|
|
ip ospf cost
|
Configure the Cost of an OSPF interface, for the purpose of determining the shortest path
|
|
|
no ip ospf cost
|
Set the cost to its default value
|
|
|
ip ospf dead-interval
|
Configure the interval before declaring the neighbor as dead
|
|
|
no ip ospf dead-interval
|
Set the dead-interval to its default value
|
|
|
ip ospf hello-interval
|
Specify the time interval between hello packets sent by the router
|
|
|
no ip ospf hello-interval
|
Set the hello-interval to its default value
|
|
|
ip ospf message-digest-key
|
Specify the message-digest key for the interface and enable OSPF MD5 authentication
|
|
|
no ip ospf message-digest-key
|
Return the interface to its default value
|
|
|
ip ospf network point-to-multipoint
|
Specify the network type for the interface
|
|
|
ip ospf network point-to-multipoint
|
Return the interface to its default value
|
|
|
ip ospf priority
|
Configure interface priority used in Designated Router election
|
|
|
no ip ospf priority
|
Set the OSPF priority to its default value
|
|
|
ip ospf router-id
|
Configure the router ID
|
|
|
no ip ospf router-id
|
Return the router ID to its default value
|
|
|
router ospf
|
Enable OSPF protocol on the system and to enter the router configuration context
|
|
|
no router ospf
|
Restore the default value and disable OSPF globally
|
|
|
area
|
Configure the OSPF area ID of the router
|
|
|
no area
|
Delete the OSPF area id
|
|
|
default-metric
|
Set the interface OSPF route metric value
|
|
|
network
|
Enable OSPF in a network
|
|
|
no network
|
Disable OSPF in a network. The default value is disabled.
|
|
|
passive-interface
|
Suppress OSPF routing updates on an interface. Used to allow interfaces to be flooded into the OSPF domain as OSPF routes rather than external routes.
Note:
Use the network command with this command to make the network passive.
|
|
|
redistribute
|
Redistribute routing information from other protocols into OSPF
|
|
|
no redistribute
|
Disable resistribution by OSPF
|
|
|
timers spf
|
Configure the delay between runs of OSPFs (SPF) calculation
|
|
|
no timers spf
|
Restore the default value
|
|
|
show ip ospf
|
Display general information about OSPF routing
|
|
|
show ip ospf database
|
Display lists of information related to the OSPF database for a specific router
|
|
|
show ip ospf interface
|
Display the OSPF-related interface information
|
|
|
show ip ospf neighbor
|
Display OSPF neighbor information on a per-interface basis
|
|
|
show ip protocols
|
Display OSPF parameters and statistics
|
Related links