Software and firmware management commands

Last Updated : Jun 11, 2021 |
Prolog information
Metadata
Keywords:
For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
Command
Description
copy ftp module
Upgrade the firmware on a media module from an FTP server by entering this command followed by the module number of the module you want to upgrade.
copy ftp SW_imageA
Upgrade Branch Gateway firmware into Bank A from an FTP server.
copy ftp SW_imageB
Upgrade Branch Gateway firmware into Bank B from an FTP server.
copy tftp module
Upgrade the firmware on a media module from a TFTP server.
copy tftp SW_imageA
Upgrade Branch Gateway firmware into Bank A from a TFTP server.
copy tftp SW_imageB
Upgrade Branch Gateway firmware into Bank B from a TFTP server.
copy https module
Upgrade the firmware on a media module from a HTTP or HTTPS server.
copy https SW_imageA
Upgrade Branch Gateway firmware into Bank A from an HTTP or HTTPS server.
copy https SW_imageB
Upgrade Branch Gateway firmware into Bank B from an HTTP or HTTPS server.
copyedge scp module
Upgrade the firmware on a media module from an SCP server via Avaya SBC tunnel.
copyedge scp SW_imageA
Upgrade Branch Gateway firmware into Bank A from an SCP server via Avaya SBC tunnel.
copyedge scp SW_imageB
Upgrade Branch Gateway firmware into Bank B from an SCP server via Avaya SBC tunnel.
copy usb announcement-file
Upgrade announcements files from the USB mass storage device.
copy https announcement-file
Upgrade announcements files from an HTTP or HTTPS server.
copyedge scp announcement-file
Upgrade announcements files from an SCP server via Avaya SBC tunnel.
copy usb auth-file
Upgrade the authorization file from the USB mass storage device.
copy usb module
Upgrade the firmware on a media module from the USB mass storage device.
copy usb phone-image
Upgrade phone images from the USB mass storage device.
copy usb phone-script
Upgrade phone scripts from the USB mass storage device.
copy usb startup-config
Upgrade the startup configuration file from the USB mass storage device.
copy scp SW_imageA
Downloads a software image from an SCP server into Bank A. The command prompts for the username and password.
copy scp SW_imageB
Downloads a software image from an SCP server into Bank B. The command prompts for the username and password.
copy scp easg
Copy and install an EASG Site Certificate using scp.
copy usb SW_image
Upgrade Branch Gateway firmware into Bank A or into Bank B, from the USB mass storage device.
copy usb easg
Copy and install an EASG Site Certificate using a USB device.
dir
List all files in the USB mass storage device connected to Branch Gateway.
set boot bank
Set the default bank from which firmware is loaded during startup.
show boot bank
Display the bank from which Branch Gateway is currently set to load its firmware upon startup or reset.
show download software status
Display the status of the firmware download process.
show image version
Display the firmware version of the image on both memory banks of the device.
Note:
Branch Gateway has four G450 hardware versions. Use the show system command to check the hardware version. If the Model is G450v4, it uses a different software image: g450v4_sw_x_y_z.bin.