Summary of access control list commands

Last Updated : Nov 06, 2012 |
Prolog information
Metadata
Keywords:
For more information about these commands, see the Avaya Branch Gateway G430 CLI Reference.
Root level command
Command
Command
Description
interface {dialer| loopback| fastethernet| tunnel|vlan}
Enter the Dialer, Loopback, FastEthernet, Tunnel or VLAN interface configuration context
ip access-group
Activate a specific Access Control list, for a specific direction, on the current interface
ip simulate
Test the action of a policy on a simulated packet
show ip access-control-list
Display the attributes of a specific access control list or of all access control lists on the current interface
ip access-control-list
Enter configuration mode for the specified policy access control list, and create the list if it does not exist
cookie
Set the cookie for the current list
ip-fragments-in
Specify the action taken on incoming IP fragmentation packets for the current access control list
ip-option-in
Specify the action taken on incoming packets carrying an IP option for the current access control list
ip-rule
Enter configuration mode for a specified policy rule or, if the rule doesn’t exist, create it and enter its configuration mode
composite- operation
Assign the specified composite operation to the current rule
destination-ip
Apply the current rule to packets with the specified destination IP address
dscp
Apply the current rule to packets with the specified DSCP value
fragment
Apply the current rule for non-initial fragments only
icmp
Apply the current rule to a specific type of ICMP packet
ip-protocol
Apply the current rule to packets with the specified IP protocol
show composite- operation
Display the parameters of the composite operation assigned to the current rule
show ip-rule
Display the attributes of the current rule
source-ip
Apply the current rule to packets from the specified source IP address
tcp destination-port
Apply the current rule to TCP packets with the specified destination port
tcp established
Apply the current rule only to packets that are part of an established TCP session
tcp source-port
Apply the current rule to TCP packets from ports with specified source port
udp destination-port
Apply the rule to UDP packets with the specified destination port
udp source-port
Apply the rule to UDP packets from the specified source port
name
Assign a name to the current list
owner
Specify the owner of the current list
show composite- operation
Display the composite operations configured for the list
show ip-rule
Display the rules configured for the current list attributes of a specific rule
show list
Display the attributes of the current list, including its rules
ip policy-list- copy
Copy an existing policy list to a new list
show ip access-control-list
Display the attributes of a specific access control list or of all access control lists