QoS Trap output fields

Last Updated : May 05, 2023 |
Prolog information
The following table describes the fields in the QoS trap according to the numbered labels in the example.
Label
Description
From the trap example
1
The date on which the trap was received
Oct 20
2
The time at which the trap was received
11:13:40
3
The IP address of the local MGP
135.8.118.252
4
The Branch Gateway up time
sysUpTime.0 = Timeticks: (43147723) 4 days, 23:51:17.23
5
The trap name, which indicates that this is a QoS trap
snmpTrapOID.0 = OID: av
RtpQoSTrap
6
The local gateway PMI
avRtpSessionLocAddrV4.0 = IpAddress: 135.8.118.252
7
The remote VoIP engine, gateway PMI, or IP phone address
avRtpSessionRemAddrV4.0 = IpAddress: 135.8.76.107
8
The duration of the RTP session
Duration: 00:04:33
9
Format: gwt@<MGP-address>
avRtpSessionCname.0 = STRING: gwp@135.8.118.252
10
The local extension number and conference ID in format <conference ID>:<extension number>.
Conference calls can involve more than one entry in the session table. Multiple sessions belonging to the same conference call can usually be identified by a common conference ID.
Notes:
  • The phone string data is received from CM if VMON is configured.
  • If you are not running VMON, you can cause CM to send the phone string data by configuring a dummy RTCP-server for the region, with a 'localhost' IP address (127.x.x.x).
avRtpSessionPhone.0 = STRING: 69:2011
11
An arbitrary index number for the session in the session table
avRtpSessionDebugStr.0 = STRING: Id{35}
12
The total number of sent traps since the application was enabled
Traps{2411/0}
13
The number of traps that were dropped by the trap rate limiter since the application was enabled. This item can be used, when analyzing received traps logs, to identify missing traps (due to network conditions or the rate limiter). This is also displayed by the show rtp-stat summary command.
Traps{24/012}
14
The number of times the application sampled the VoIP engine (RTP receiver) statistics
Stats{S 54}
15
The total number of received RTCP packets
Stats{S 54 RTCP 5414 RX 9236}
16
The total number of received RTP packets
Stats{S 54 RTCP 54 RX 923615}
17
The codec used for the session
g729
18
The codec packet size, in bytes
62B
19
The encryption method
encryptionOff
20
The received silence suppression method
SSup disabled19/disabled
21
The transmitted silence suppression method
SSup disabled/disabled20
22
The average of all codec loss values sampled during the session
Loss 0.1%21 #1
23
The codec loss event counter
Loss 0.1% #122
24
The average of all codec round trip time values sampled during the session
RTT 570mS23 #38
25
The codec round trip time event counter
RTT 570mS #3824
26
The percentage contribution of jitter-buffer underruns to the average codec loss
Jbuf 0.1%25/0.0%
27
The percentage contribution of jitter-buffer overruns to the average codec loss
Jbuf 0.1%/0.0%26
28
The average of all network RTP packet loss values sampled during the session
Loss 0.0%27 #0
29
The network RTP packet loss event counter
Loss 0.0% #028
30
The average of all network RTT values during the session
RTT 376mS29 #38
31
The network RTT event counter
RTT 376mS #3830
32
The network jitter at the RTP receiver
Jtr #0
33
The minimum and maximum TTL values sampled in the session
TTL 63-63
34
A counter that increments each time two consecutive RTP packets with the sample RTP sequence number are received
Dup 0
35
A counter that increments each time an RTP packet with a sequence number less than the last known sequence is received
Fall 0
36
The average network loss experienced by the remote RTP receiver
Rem{Loss 0.0%36 #0 Jtr #0}
37
A counter that increments each time the remote loss is sampled over its threshold
Rem{Loss 0.0% #037 Jtr #0}
38
A counter that increments each time the network jitter experienced by the remote RTP receiver is sampled over its threshold
Rem{Loss 0.0% #0 Jtr #038}
39
The echo cancellation loss on the TDM bus. A high value (that is, a low absolute value) may indicate impairment of DCP terminals.
EC{Loss 45dB}