For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
|
Root level command
|
Command
|
Description
|
|
interface (fastethernet| VLAN)
|
|
Enter the FastEthernet or VLAN interface configuration context
|
|
ip bootp-dhcp network
|
Select the network from which the BOOTP/DHCP server should allocate an address
This command is required only when there are multiple IP interfaces over the VLAN. You must be in an interface context to use this command
|
|
no ip bootp-dhcp network
|
Restores the default value.
|
|
ip bootp-dhcp server
|
Add or remove a BOOTP/DHCP server to handle BOOTP/DHCP requests received by the current interface
A maximum of two servers can be added to a single interface. You must be in an interface context to use this command
|
|
no ip bootp-dhcp server
|
Removes a server.
|
|
ip bootp-dhcp relay
|
|
Enable or disable relaying of BOOTP and DHCP requests to the BOOTP/DHCP server
You must be in general context to use this command.
|
|
no ip bootp-dhcp relay
|
|
Disables the relaying of BOOTP and DHCP requests.
|
