For more information about these commands, see Avaya Branch Gateway G430 CLI Reference.
|
Command
|
Description
|
|
set lldp re-init-delay
|
Set the delay from when a port is set to LLDP disable until re-initialization is attempted
|
|
set lldp system-control
|
Enable or disable the LLDP application globally per device or stack
|
|
set lldp tx-delay
|
Set the TxDelay, which is the minimal delay in seconds between successive LLDP frame transmissions, on each port
|
|
set lldp tx-hold-multiplier
|
Set the TxHoldMultiplier, which is a multiplier on the TxInterval that determines the actual TTL value sent in an LLDP frame
|
|
set lldp tx-interval
|
Set the TxInterval, the interval at which the device transmits LLDP frames
|
|
set port lldp
|
Change the administrative LLDP status of a port
|
|
set port lldp tlv
|
Enable or disable the transmission of the optional TLVs on a per port basis
|
|
show lldp
|
Display the LLDP information received on each port
|
|
show lldp config
|
Display the global LLDP configuration
|
|
show port lldp config
|
Display port-level LLDP configuration
|
|
show port lldp vlan-name config
|
Show the VLANs that are being transmitted on a specific port
|
