Specifying DSCP

Last Updated : Nov 06, 2012 |

Prolog information

Metadata

Keywords:

Enter dscp, followed by a DSCP value (from 0 to 63), to apply the rule to all packets with the specified DSCP value.
Enter no dscp to remove the rule from the list.

For example, the following command specifies that rule 5 in access control list 301 only matches packets in which the DSCP value is set to 56:

Gxxx-001(ACL 301/ip rule 5)# dscp 56

Send Feedback

AVAYA DOCUMENTATION CENTER