Branch Gateway traps

Last Updated : Apr 06, 2020 |
Prolog information
Metadata
Keywords:
Name
Parameters (MIB variables)
Class
Msg Facility
Severity
Trap Name / Mnemonic
Format
Description
coldStart
STD
Boot
Warning
coldStart
Agent Up with Possible Changes (coldStart Trap) enterprise:$E ($e) args($#):$*
A coldStart trap indicates that the entity sending the protocol is reinitializing itself in such a way as to potentially cause the alteration of either the agent's configuration or the entity's implementation.
warmStart
STD
Boot
Warning
warmStart
Agent Up with No Changes (warmStart Trap) enterprise:$E ($e) args($#):$*
A warmStart trap indicates that the entity sending the protocol is reinitializing itself in such a way as to keep both the agent configuration and the entity's implementation intact.
LinkUp
ifIndex, ifAdminStatus, ifOperStatus
STD
System
Warning
LinkUp
Agent Interface Up (linkUp Trap) enterprise:$E ($e) on interface $1
A linkUp trap indicates that the entity sending the protocol recognizes that one of the communication links represented in the agent's configuration has come up.
The data passed with the event is
1) The name and value of the ifIndex instance for the affected interface. The name of the interface can be retrieved via an snmpget of.1.3.6.1.2.1.2.2.1.2.INST, where INST is the instance returned with the trap.
linkDown
ifIndex, ifAdminStatus, ifOperStatus
STD
System
Warning
linkDown
Agent Interface Down (linkDown Trap) enterprise:$E ($e) on interface $1
A linkDown trap indicates that the entity that is sending the protocol recognizes a failure in one of the communication links represented in the agent's configuration.
The data passed with the event is
1) The name and value of the ifIndex instance for the affected interface. The name of the interface can be retrieved via an snmpget of.1.3.6.1.2.1.2.2.1.2.INST, where INST is the instance returned with the trap.
SNMP_Authen_
Failure
P330
SECURITY
Notification
authentic
Failure
Incorrect Community Name (authentication Failure Trap) enterprise:$E ($e) args($#):$*
An authentication failure trap indicates that the protocol is not properly authenticated.
risingAlarm
alarmIndex, alarmVariable, alarmSample Type, alarmValue, alarmRising Threshold
RMON
THRES HOLD
Warning
rising Alarm
Rising Alarm: $2 exceeded threshold $5; value = $4. (Sample type = $3; alarm index = $1)
The SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps
fallingAlarm
alarmIndex, alarmVariable, alarmSample Type, alarmValue, alarmRising Threshold, alarmFalling Threshold
RMON
THRES HOLD
Warning
falling Alarm
Falling Alarm: $2 fell below threshold $5; value = $4. (Sample type = $3; alarm index = $1)
The SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps
deleteSW Redundancy Trap
soft Redundancy Status
P330
SWITCH FABRIC
Info
deleteSWRedundancyTrap
Software Redundancy $1 definition deleted
The trap notifies the manager of the deletion of the specified redundant link, which is identified by the softRedundancyId. It is enabled/disabled by chLntAgConfigChangeTraps.
createSW Redundancy Trap
soft Redundancy Status
P330
SWITCH FABRIC
Info
createSWRedundancyTrap
Software Redundancy $1 definition created
The trap is generated on the creation of the redundant links for the specified ports. It gives the logical name of the redundant link the identification of the main and secondary ports and the status of the link. The softRedundancyId defines the instances of the above- mentioned variables. The trap is enabled/disabled by chLntAgConfigChangeTraps.
lseIntPortCAMLastChange Trap
lseIntPortCAMLastChange
P330
SWITCH FABRIC
Info
lseIntPort CAMLast Change Trap
CAM Change at $1
This trap reports of the occurred configuration changes. It is enabled/disabled by chLntAgCAMChangeTraps.
duplicateIP Trap
ipNetToMediaPhysAddress, ipNetToMediaNetAddress
P330
ROUTER
Warning
duplicateIPTrap
Duplicate IP address $2 detected; MAC address $1
This trap reports to the Management station on Duplicate IP identification. CRP identify the new IP on the network. If it similar to one of its IP interfaces, the CRP will issue a SNMP trap, containing the MAC of the intruder.
lntPolicy ChangeEvent
ipPolicy Activation EntID, ipPolicy ActivationList, ipPolicy Activationif Index, ipPolicy ActivationSub Context
P330
POLICY
Info
lntPolicyChangeEvent
Module $1 - Active policy list changed to $2
The trap reports a change in the active list specific for a policy-enabled box or module.
lntPolicy AccessControlViolationFlt
ipPolicy AccessControl
ViolationEnt ID, ipPolicy AccessControlViolationSrc Addr, ipPolicy AccessControl
ViolationDst Addr, ipPolicy AccessControl
Violation Protocol, ipPolicy AccessControl
Violation
L4SrcPort, ipPolicy AccessControl
ViolationL4DstPort, ipPolicy AccessControlViolation Established, ipPolicyRuleID, ipPolicyRule ListID, ipPolicy AccessControlViolationIf Index, ipPolicy AccessControl
ViolationSub Ctxt, ipPolicy AccessControl
ViolationTime
P330
POLICY
Warning
lntPolicy Access Control ViolationFlt
IP PolicyAccess Control violation, if-index$9 ip-protocol=$4 src-ip=$2 dst-ip=$3 src-port=$5 dst-port=$6 rule-id=$8 rule-list=$$9
This trap reports to the Management station on IP PolicyAccess Control violation. The trap includes in its varbind information about the slot where the event occurred. The id of the rule that was violated in the current rules table, and the quintuplet that identifies the faulty packet. A management application would display this trap and the relevant information in a log entry. This trap will not be sent at intervals smaller than one minute for identical information in the varbinds list variables.
DormantPort Fault
genPortSWRdFault, genPortGroup Id, genPortId
P330
SWITCH FABRIC
Warning
Dormant PortFault
Dormant Port Connection Lost on Module $2 Port $3;
This trap reports the loss of connection on a dormant port.
DormantPort Ok
genPortSWRdFault, genPortGroup Id, genPortId
P330
SWITCH FABRIC
Notification
Dormant PortOk
Dormant Port Connection Returned to Normal on Module $2 Port $3;
This trap reports the return of connection on a dormant port.
InlinePwrFlt
genGroup FaultMask, genGroupId, genGroup BUPSActivity Status
P330
POE
Error
InlinePwr Flt
Module $2 Inline Power Supply failure
This trap reports the failure of an inline power supply.
InlinePwrFltOK
genGroup FaultMask, genGroupId, genGroup BUPSActivity Status
P330
POE
Notification
InlinePwr FltOK
Module $2 Inline Power Supply failure was cleared
This trap reports the correction of a failure on an inline power supply.
WanPhysical AlarmOn
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Critical
Wan Physical AlarmOn
Cable Problem on port $4
An E1/T1/serial cable was disconnected.
wanPhysical AlarmOff
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Notification
wan Physical AlarmOff
Cable Problem on port $4 was cleared
An E1/T1/serial cable was reconnected.
wanLocal AlarmOn
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Error
wanLocal AlarmOn
Local Alarm on interface $4
Local alarms, such as LOS.
wanLocal AlarmOff
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Notification
wanLocal AlarmOff
Local Alarm on interface $4 was cleared
Local alarms, such as LOS, was cleared.
wanRemote AlarmOn
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Error
wan Remote AlarmOn
Remote Alarm on interface $4
Remote alarms, such as AIS.
wanRemote AlarmOff
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Notification
wan Remote AlarmOff
Remote Alarm on interface $4 was cleared
Remote alarms, such as AIS, was cleared.
wanMinor AlarmOn
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Warning
wanMinor AlarmOn
Minor Alarm on interface $4
Low BER.
wanMinorAlarm Off
ifIndex, ifAdminStatus, ifOperStatus, ifName, ifAlias, dsx1Line Status
WAN
WAN
Notification
wanMinor AlarmOff
Minor Alarm on interface $4 was cleared
Normal BER.
AvEntFanFlt
entPhysical Index, entPhysical Descr, entPhySensorValue, avEntPhy SensorLo Warning
AVAYA-ENTITY
TEMP
AvEntFan Flt
Fan $2 is Faulty
This trap reports a faulty fan.
AvEntFanOk
entPhysical Index, entPhysical Descr, entPhySensor Value, avEntPhy SensorLo Warning
AVAYA-ENTITY
TEMP
Notification
AvEntFanOk
Fan $2 is OK
This trap reports the return to function of a faulty fan.
avEntAmbient TempFlt
entPhysical Index, entPhysical Descr, entPhySensor Value, avEntPhy SensorHi Warning, entPhysical ParentRelPos
AVAYA-ENTITY
TEMP
avEnt Ambient TempFlt
Ambient Temperature fault ($3)
This trap reports that the ambient temperature in the device is not within the acceptable temperature range for the device.
avEntAmbient TempOk
entPhysical Index, entPhysical Descr, entPhySensor Value, avEntPhy SensorHi Warning, entPhysical ParentRelPos
AVAYA- ENTITY
TEMP
Notification
avEnt Ambient TempOk
Ambient Temperature fault ($3) cleared
This trap reports that the ambient temperature in the device has returned to the acceptable range for the device.