Enter dial-pattern<dialed-string>, where <dialed-string> is a dial pattern to be used on outgoing calls.
STEP RESULT:
The command line prompt changes to super-sls/dial-pattern <dialed-string>. If you want to remove the incoming routing treatment from the SLS administration, enter exit to leave the second-level dial-pattern context and return to the (super-sls)# context, and then enter clear dial-pattern<dialed-string>.
Enter set type<dial-type>, where <dial-type> specifies the type of outbound call and the dialing privileges available for outbound calls.
ADDITIONAL INFORMATION:
Each level of call includes the previous level’s dialing privileges. For example, locl has the calling privileges of iop, intl, etc.
Enter set max-length<length> to define the maximum length of the dialed string.
ADDITIONAL INFORMATION:
This must be set prior to the minimum length if the minimum length is larger than the default value.
Enter set min-length<length> to define the minimum length of the dialed string.
Enter set tgnum<tgnum> to designate a trunk-group for which this dialed string is assigned.
Enter set denyno to permit stations to originate outgoing trunk calls.
At the command-line enter set insert-digits<digits> to define the digits to insert into a dialed string, if required.
Enter set delete-digits<digits> to define the number of digits to be deleted from a dialed string, if required.
ADDITIONAL INFORMATION:
Note:
You can either insert or delete digits, but not both.
Enter show to check the outbound dial-pattern string administration.
STEP RESULT:
The report lists the dial-pattern parameters. For example:
