Use this procedure to connect to a LAN device on the IP Office network through the SSL VPN tunnel using network address and port translation (NAPT). You can connect to a LAN device using a communication application that has an NAPT rule configured for it. For information on configuring NAPT rules, see Network address and port translation (NAPT) rules.
Before you begin
The SSL VPN tunnel must be in service, and you must have the following information:
the IP address of the SSL VPN tunnel
the external port number configured in the NAPT rule for the LAN device you are connecting to
Procedure
Open the communication application you are using to connect to a LAN device through the SSL VPN tunnel.
Establish a communication session using the IP address of the SSL VPN tunnel and the external port number for the LAN device.
