Configuring NAPT rules

Last Updated : Nov 09, 2015 |

Perform this procedure on the Manager interface. You can configure up to 64 rules.

When you configure an NAPT rule, you must select an application type. The following application options are available:

  • Custom

  • VMPro

  • One-X Portal

  • SSH

  • TELNET

  • RDP (Remote Desktop Protocol)

  • Web Control

You can use the Custom setting to configure a NAPT rule for a new application type. You can also use the Custom setting with a modified External Port Number to open two concurrent communication sessions using the same application to connect to the same LAN device. For example, to enable two concurrent SSH sessions to the same IP address, the two NAPT rules would look similar to the following.

Application

Protocol

External Port Number

Internal IP address

Internal Port Number

SSH

TCP

22

192.168.40.1

22

Custom

TCP

221

192.168.40.1

22

Procedure

  1. In the navigation list, select Service.
  2. In the Service list, select the SSL VPN service where you want to configure NAPT rules.
  3. In the details pane for the service, select the NAPT tab.
  4. Under Application, open the drop down list and select an application type.

    The Protocol field and the Port Number fields are automatically filled with the default values.

  5. (Optional) If you want to configure a Custom application, modify the External Port Number field.
  6. Repeat steps 4 and 5 to configure additional rules.
Related information
Network address and port translation (NAPT) rules