Adding the IP codec set

Last Updated : Dec 26, 2013 |
You must add the IP codec set in Communication Manager to establish a successful RTP path with the customer.
Prolog information
Metadata
Keywords:
  1. On the SAT session, in the Command: prompt, type change ip-codec-set n and press Enter.
    ADDITIONAL INFORMATION:
    The n is the ip codec set number.
    STEP RESULT:
    The system displays the IP Codec Set screen.
  2. Use the up or down arrow key to scroll.
    ADDITIONAL INFORMATION:
    On the first page, provide the following information:
    • Audio Codec
    • Silence Suppression
    • Frames Per Packet
    • Packet Size in milliseconds
    STEP RESULT:
    The system displays the first screen of IP Codec Set with the information similar to the following:
    =========================================================================
    change ip-codec-set 1                                           Page   1 of   2

                              IP Codec Set

        Codec Set: 1

        Audio        Silence      Frames   Packet
        Codec        Suppression  Per Pkt  Size(ms)
     1: G.729             n         2        20
     2: G.711A            n         2        20
     3: G.729A            n         2        20
     4: G.711MU           n         2        20
     5:
     6:
     7:
    =========================================================================
  3. Press the F3 key to save the changes.