Use the following procedure to configure one or more syslog server for the Session Manager logging and SIP tracer for single Session Manager.
On the System Manager web console, click Elements Session Manager Session Manager Administration.
On the Add Session Manager page, in the General section, perform the following:
In the SIP Entity Name field, type the name of the Session Manager instance.
In the Management Access Point FQDN/IP field, type the FQDN or IP address of the management interface of the Session Manager server.
ADDITIONAL INFORMATION:
The Management Access Point FQDN/IP field accepts only IPv4 addresses even when you create Session Manager instances for entities supporting IPv6 or both address families.
To configure the first Syslog server, on the Add Session Manager page, in the Syslog Servers section, perform the following:
Select the Enable Syslog Server 1 check box.
In Transport, click the method to transfer the syslogs.
ADDITIONAL INFORMATION:
The options are:
TCP
TLS Server Certificate Authentication
TLS Mutual Authentication
UDP
If you select TLS Mutual Authentication, you must manually install the appropriate CA certificate on your remote syslog server.
If you select TLS, you must configure the syslog certificates on the Inventory page.
In IP or FQDN, type the FQDN or IP address of the remote syslog server.
In Port, type the port of the remote syslog server.
To configure the second Syslog server, on the Add Session Manager page, in the Syslog Servers section, perform the following:
Select the Enable Syslog Server 2 check box.
In Transport, click the method to transfer the syslogs.
ADDITIONAL INFORMATION:
The options are:
TCP
TLS Server Certificate Authentication
TLS Mutual Authentication
UDP
In IP or FQDN, type the FQDN or IP address of the remote syslog server.
In Port, type the port of the remote syslog server.
