Define a Primary Management Interface (PMI) |
Enter the context of the interface which you want to set as the Primary Management Interface (PMI). For example: interface vlan |
vlan id |
|
In the context of the interface, assign an IP address and subnet mask to the interface: ip address |
IP address |
|
netmask |
|
In the context of the interface, define this interface as the PMI pmi |
|
|
Configure the ICC-VLAN
Note:
By default, the ICC-VLAN is 1. Therefore configure the ICC-VLAN only if you wish to configure it for a VLAN other than 1.
|
Create a VLAN and enter its configuration context: interface vlan |
vlan id |
|
In the context of the VLAN interface, set the current VLAN as the ICC-VLAN: icc-vlan |
|
|
Set the VLAN ID of a LAN port (10/5 or 10/6) to the VLAN number of the ICC-VLAN: set port vlan |
vlan id |
|
module number |
|
port number |
|
Define the CLI prompt |
hostname |
hostname |
|
Define a default gateway |
ip default-gateway |
gateway IP address |
|
Create a list of validMedia Gateway Controller(s) |
set mgc list |
IP address1 |
|
IP address2 |
|
IP address3 |
|
IP address4 |
|
An H.248 TLS connection is required |
copy scp|usb|https root-ca h248 reg |
File location |
Install trusted certificates |
Display device information |
show system |
|
|
Display the current firmware and boot bank information. |
show image version |
|
|
