CLI commands for upgrading Branch Gateway firmware via SCP

Last Updated : Jan 20, 2022 |

You can use CLI commands to upload an upgrade file to the Branch Gateway. For each of these commands, include the full path of the file and the IP address of the SCP host as parameters. You must use the specific path to the file on the SCP server according to the home directory of the service (SCP) that you are using. When you enter the command, the CLI prompts you for a username and password.

  • Use the copy scp module command, followed by the module number of the module you want to upgrade, to upgrade the firmware on a media module from an SCP server

  • Use the copy scp SW_imageA command to upgrade the Branch Gateway firmware into Bank A from an SCP server

  • Use the copy scp SW_imageB command to upgrade the Branch Gateway firmware into Bank B from an SCP server