Configuring Avaya Aura® Device Services using the configuration utility

Last Updated : Jul 10, 2019 |
Prolog information
Metadata
Keywords:
Before you begin
Finish installing Avaya Aura® Device Services. Otherwise, the app configure command will not work.
  1. Run the Avaya Aura® Device Services configuration utility using the app configure command.
    ADDITIONAL INFORMATION: app configure
    Important:
    Perform this step only if you run the configuration utility at a later time after the installation.
    During the installation, the configuration menu is displayed after you accept the EULA.
    STEP RESULT:
    The script checks the current configuration of Avaya Aura® Device Services and opens the configuration menu.
  2. Provide the required configuration settings.
  3. Select Continue and press Enter.
Next steps
The following settings are mandatory for an Avaya Aura® Device Services installation:
  • Front-end host, System Manager and certificate configuration, if not configured during the initial installation phase.
  • LDAP authentication parameters.
  • Cassandra username and password.
  • Cluster configuration, mandatory if you are deploying an Avaya Aura® Device Services cluster.
  • Utility Server virtual IP and FQDN, if you enabled the Utility Server during the initial installation phase.
  • Leave CORS Configuration and Serviceability Agent Configuration unchanged.
  • Onboard Open LDAP replication, which is mandatory if you enabled Open LDAP in a cluster deployment.
    Important:
    Configure Open LDAP replication after configuring all cluster nodes.
  • OAuth configuration, including Keycloak configuration and OAuth database replication. These steps are mandatory if you enabled OAuth.
    In a cluster environment, configure OAuth settings only after configuring all cluster nodes.
To configure advanced settings, such as certificate warning period, security banner, or re-run the firewall configuration script, select the Advanced Configuration menu option.
Important:
After you configure the mandatory settings, you must restart the Avaya Aura® Device Services service:svc aads restart
If there are other settings that you must configure after restarting the Avaya Aura® Device Services server, you can run the configuration utility as described in Step 1 and gain access to the required configuration settings.