Importing the A10 Client SSL Certificate

Last Updated : Aug 19, 2022 |
Prolog information
Metadata
Keywords:
The following procedure describes how to import the A10 Client SSL Certificate.
Before you begin
Obtain an X509 certificate and the associated private key from a Certificate Authority.
Important:
To successfully establish the SSL connection with the A10 server, the Avaya Aura® Device Services enabled client must import the root certificate of the CA that you use in your deployment. In an Avaya Aura® environment, this is the System Manager root certificate by default. If you do not use System Manager for certificate management or if you use Avaya Aura® Device Services in an environment without Avaya Aura®, this is the third-party CA root certificate.
  1. Log in to the ACOS administration interface.
  2. In the Config Mode tab, select SLBSSL ManagementCertificate.
  3. Click Import.
  4. Enter the required information:
    ADDITIONAL INFORMATION:
    • The name of the certificate file.
    • The source for importing the certificate: local, remote, or text.
    • The certificate file format.
    • The source for importing the Key file: local, remote, or text.
    • The key file format.
    Note:
    In order for the Split-Horizon DNS to work properly, you must provide the certificate Common Name with a FQDN and not an IP address. The A10 external FQDN must also match the Avaya Aura® Device Services internal FQDN.
  5. Click OK and then click Save.
Related links
Remote access configuration