Adding the IP codec set

Last Updated : Dec 26, 2013 |

You must add the IP codec set in Communication Manager to establish a successful RTP path with the customer.

Procedure

  1. On the SAT session, in the Command: prompt, type change ip-codec-set n and press Enter.

    The n is the ip codec set number.

    The system displays the IP Codec Set screen.

  2. Use the up or down arrow key to scroll.

    On the first page, provide the following information:

    • Audio Codec

    • Silence Suppression

    • Frames Per Packet

    • Packet Size in milliseconds

    The system displays the first screen of IP Codec Set with the information similar to the following:

    =========================================================================
change ip-codec-set 1                                           Page   1 of   2

                          IP Codec Set

    Codec Set: 1

    Audio        Silence      Frames   Packet
    Codec        Suppression  Per Pkt  Size(ms)
 1: G.729             n         2        20
 2: G.711A            n         2        20
 3: G.729A            n         2        20
 4: G.711MU           n         2        20
 5:
 6:
 7:
=========================================================================
  3. Press the F3 key to save the changes.