On the SAT session, in the Command terminal, type add trunk-group n and press Enter.
Where, n is the trunk group number.
The system displays the TRUNK GROUP screen.
Use the up or down arrow key and scroll to the Group Type option.
In the Group Type option, type SIP and press the TAB key.
The system displays the TRUNK GROUP screen with information similar to the following:
=========================================================================
add trunk-group n Page 1 of 22
TRUNK GROUP
Group Number: 2 Group Type: sip CDR Reports: y
Group Name: trunk to ASM COR: 1 TN: 1 TAC: #2
Direction: two-way Outgoing Display? n
Dial Access? n Night Service:
Queue Length: 0
Service Type: tie Auth Code? n
Signaling Group: 2
Number of Members: 255
=========================================================================
Update the following values:
Option
Description
Group Type
sip
Signaling Group
Signaling group
Note:
You must configure the signaling group value that you created earlier.
Number of Members
The number of ports for this SIP connection.
Service Type
Tie
TAC
The trunk access code as per the dial plan.
Press F7 key to go to the next page.
There are no changes required on screen 2.
Press F7 key to go to the next page.
The page 3 of 22, displays the following information:
=========================================================================
Page 3 of 22
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Numbering Format: public
UUI Treatment: shared
Maximum Size of UUI Contents: 128
Replace Restricted Numbers? n
Replace Unavailable Numbers? n
Modify Tandem Calling Number: no
Send UCID? y
Show ANSWERED BY on Display? y
=========================================================================
