Adding the IP network region

Last Updated : Dec 26, 2013 |

You must define the authoritative domain name on the IP-network-region form.

Procedure

  1. On the SAT session, in the Command: prompt, type change ip-network-region 1 and press Enter.

    The system displays the IP NETWORK REGION screen.

  2. Use the up or down arrow key to scroll.
  3. In the first page, provide the following information:

    • Define the Authoritative Domain name.

    The first screen of IP NETWORK REGION displays the information similar to the following:

    =========================================================================
change ip-network-region 1                              Page   1 of  20
                               IP NETWORK REGION
Region: 1
Location:         Authoritative Domain: avaya.com
Name:
MEDIA PARAMETERS             Intra-region IP-IP Direct Audio: yes
      Codec Set: 1           Inter-region IP-IP Direct Audio: yes
   UDP Port Min: 2048                     IP Audio Hairpinning? n
   UDP Port Max: 3329
DIFFSERV/TOS PARAMETERS
 Call Control PHB Value: 46
        Audio PHB Value: 46
        Video PHB Value: 26
802.1P/Q PARAMETERS
 Call Control 802.1p Priority: 6
        Audio 802.1p Priority: 6
        Video 802.1p Priority: 5   AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS                                       RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
         Keep-Alive Count: 5
=========================================================================
  4. Press F3 key to save the changes.