Adding an IPv6 Service Address to a High Availability configuration on Inactive Server

Last Updated : Dec 02, 2024 |
Prolog information
Metadata
Keywords:
Use this procedure on the inactive server to add an IPv6 Service Address to an existing 1+1 High Availability cluster.
  1. To disable HA, navigate to EM Cluster Configuration High Availability.
  2. Clear Enable High Availability.
  3. Click Save.
  4. Click Confirm.
  5. If necessary, add a new IPv6 address to the server.
    1. Log in to a server console.
    2. Add the new IPv6 address using a specific procedure.
    3. Restart EM using the command:
      ADDITIONAL INFORMATION:
      service avaya.em restart
  6. To configure IPv6 from EM, navigate to EM System Configuration Network Settings IP Interface Assignment.
    ADDITIONAL INFORMATION:
    Configure the Signaling/Media IPv6 interfaces as required.
  7. Click Save.
  8. Click Confirm.
  9. To enable HA, navigate to EM Cluster Configuration High Availability and select Enable High Availability.
  10. Enter an IPv6 Service Address. Do not use a host name.
  11. Click Save.
  12. Click Confirm.
Related links
1+1 High Availability cluster configuration
Selecting IP interface assignments