Configuring STUN and TURN servers

Last Updated : Feb 25, 2014 |
Prolog information
Metadata
Keywords:
Before you begin
You must enable the Firewall NAT Tunneling Media Processor before you can configure STUN and TURN servers.
  1. Navigate to EMSystem ConfigurationMedia ProcessingICESTUN/TURN ServersServers.
  2. Click Add...
  3. Enter a unique name for the server in the Name field.
  4. Enter a description for the server in the Description field.
  5. Select the type of server from the Type drop-down menu.
  6. Select the required transport protocol from the Transport Protocol drop-down menu.
  7. Enter the server IP address in the Address field.
  8. Enter the server port in the Port field.
    ADDITIONAL INFORMATION:
    The default port is 3478.
  9. Specify the priority of this server compared to other servers in the pool in the Priority field. A lower number represents a higher priority.
  10. Specify the weight of this server compared to other servers in the pool in the Weight field.
  11. Select one of the following Account options:
    • If an account is not required for the server, select Disabled.
    • To use an existing STUN/TURN account with this server, select the required alias and user ID from the Use an existing account drop-down menu.
    • To create a new STUN/TURN account for this server, select Create a new account and configure the Alias, User ID and Password fields.
  12. Click Save.
Related links
WebRTC configuration
WebRTC configuration