Adding a SNMP Trap Destination

Last Updated : Sep 18, 2019 |
Prolog information
Metadata
Keywords:
Perform the following procedure to add an SNMP trap destination.
Refer to the following definitions of the new SNMP trap destination for descriptions of each property:
Definitions for SNMP Trap Destination Properties
Destination Address
The hostname or the IPv4 address of the SNMP trap destination. The hostname needs to be resolvable by the media server and the maximum length is 64 characters.
Destination Port
The port that the media server will send the SNMP trap to and the default is 162. The range is 0 to 65535 and must match what is configured on the NMS.
Before you begin
Ensure that you have a Network Management Station configured and user configuration is known so that the configuration on the media server is the same.
  1. On the Primary server navigate to EMSystem ConfigurationNetwork SettingsSNMPDestinations.
  2. Click Add.
  3. Enter the address of the NMS in the Destination Address field.
  4. Enter the NMS port in the Destination Port field.
  5. Click Save.
Next steps
Add a SNMP trap route
You must restart all the media servers in the cluster to apply the changes. If you have other SNMP configuration changes required, then proceed with those changes before restarting the servers.
Related links
SNMP Trap Destinations