Uploads an announcement file from the Branch Gateway announcement directory to a remote HTTP or HTTPS server. The files can then be downloaded from the HTTP or HTTPS server to Avaya Voice Announcements Manager (VAM).
Prolog information
Metadata
Keywords:
Note:
If you install increased RAM, the command works only if an announcement file system exists. An announcement file system is created when one of the following occurs:
The gateway is registered to Communication Manager, and at the SAT interface of the Communication Manager, you enter enable announcement-board.
You run a backup or restore operation (without reset).
webserver host:- IPv4 address, IPv6 address, or Fully Qualified Domain Name of the remote HTTP or HTTPS server
:webserver port (optional)
/file path
path
filename
https://
transfer-type
The transfer type depending on the type of verification. The options are:
secure: verifies the certificate and hostname, applicable for https
certificate: verifies the webserver TLS certificate, applicable for https
unsecure: no TLS certificate verification required
secure
certificate
unsecure
secure for https
unsecure for http
destination-filename
The destination file name, including full path, if a name change is required. File name must not include blank spaces.
Up to 32 characters, not including the path
User level
read-write
Context
general
Example
To upload local_announcement2.wav from the announcements directory to a remote HTTP or HTTPS server with IP address 192.168.49.10, place it in the C drive, and name it remote_announcement2.wav:
