ipv6 icmp out-rate-limit

Last Updated : Nov 06, 2012 |
Sets the maximum egress rate of ICMPv6 messages.. Use the no ipv6 icmp out-rate-limit CLI command to restore the egress rate to the default value.
Prolog information
Metadata
Keywords:

Syntax

ipv6 icmp out-rate-limit {disable | <rate>}
no icmp out-rate-limit

Parameters

Parameter
Description
Possible Values
Default Value
disable
Disables the limit for the egress rate of ICMPv6 messages..
rate
Maximum egress rate of ICMPv6 messages
1 — 10,000 packets per second
50 packets per second

User level

read-write

Context

general

Example

To set the ICMPv6 egress rate to 10,000 packets per second:
Gxxx-001(super)# ipv6 icmp out-rate-limit 10000

Done!
To reset the ICMPv6 egress rate to the default value:
Gxxx-001(super)# no ipv6 icmp out-rate-limit

Done!