copy tftp SW_imageA

Last Updated : Apr 12, 2018 |
Prolog information
Metadata
Keywords:
This command downloads a software image from a TFTP server into Bank A of the Branch Gateway. The command prompts for the username and password.
Note:
To use this command, you need to have an active TFTP server, and to create a file into which to download the data. If Avaya Network Manager is running, you do not need an additional TFTP server.

Syntax

copy tftp SW_imageA filename {<ip-addr>|<IPv6–addr>[%zone-id]|<hostname>}

Parameters

Parameter
Description
Possible Values
Default Value
filename
File name with full path
string
ip-addr
IPv4 address of the server
IPv6-addr
IPv6 address of the server
%zone-id
VLAN number
1 — 4,090
hostname
Hostname of the server

User level

read-write

Context

general

Example

To download the software file, imgA.bin, from the TFTP server 149.49.36.200 into boot bank A:Gxxx-001(super)# copy tftp SW_imageA c:\imgA.bin 149.49.36.200
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
To download the software file, imgA.bin, from the TFTP server 2001:db8::9531:8699 into boot bank A:Gxxx-001(super)# copy tftp SW_imageA c:\imgA.bin 2001:db8::9531:8699
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
To download the software file, imgA.bin, from the TFTP server my.tftp.server into boot bank A:Gxxx-001(super)# copy tftp SW_imageA c:\imgA.bin my.tftp.server
Beginning download operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.