|
clear utilization cpu
|
Disable CPU utilization measurements.
|
|
set utilization cpu
|
Enable CPU utilization measurements.
|
|
show download
|
Display the status of the current file copy process to the device.
|
|
show faults
|
Display information about currently active faults.
|
|
show mg list_config
|
Display the current hardware and firmware configurations for the installed Branch Gateway equipment.
|
|
show mgc
|
Display information about the Media Gateway Controller with which the Branch Gateway is registered.
|
|
show mm
|
Display information about media modules that are installed on the Branch Gateway.
|
|
show module
|
Display brief information about the media modules installed in the Branch Gateway.
|
|
show recovery
|
Display the Branch Gateway monitoring and recovery setup.
|
|
show restart-log
|
Display information about the last time that the Branch Gateway was reset.
|
|
show system
|
Display information about the Branch Gateway.
|
|
show temp
|
Display the device temperature.
|
|
show timeout
|
Display the amount of time in minutes the terminal remains idle before timing out.
|
|
show upload
|
Display the status of the current file copy process from the device.
|
|
show utilization
|
Display information about CPU and memory usage on the Branch Gateway.
|
|
show voltages
|
Display power supply voltages.
|
|
test led
|
Test the system ALM, MDM and CPU LEDs on the front panel of the Branch Gateway.
|
