The set non-oob-interfaces access command is used to enable or disable access to the gateway from all interfaces except the out-of-band management interface. If the access is disabled then SSH, telnet, SNMP are only available on the Out-of-Band management interface.
Note:
The command is denied if an Out-of-Band interface is not configured.
Prolog information
Metadata
Keywords:
Syntax
set non-oob-interfaces access { enabled | disabled }
Parameters
Parameter
Description
Possible Values
Default Value
enabled/disabled
Enables/disables gateway access on non out-of-band interfaces
enabled, disabled
enabled
User Level
read-write
Context
general
Example
To disable all access to the gateway except for the OOB interface:
Gxxx-001(super)# set non-oob-interfaces access disabled
