Packet sniffing

Last Updated : Sep 19, 2023 |
Prolog information
Metadata
Keywords:
Packet sniffing CLI commands
Root level command
First level command
Second level command
Description
capture buffer-mode
Set the capture buffer to cyclic mode.
capture buffer-size
Change the size of the capture file.
capture filter-group
Activate a capture list.
capture interface
Specify a capture interface (by default, the service captures from all interfaces simultaneously).
capture ipsec
Set whether to capture IPSec VPN packets, handled by the internal VPN process, decrypted (plaintext) or encrypted (cyphertext).
capture max-frame-size
Set the maximum octets that are captured from each frame.
capture start
Start capturing packets..
capture stop
Stop capturing packets.
capture-service
Enable or disable the capture service.
clear capture-buffer
Clear the capture buffer (useful in case it holds sensitive information).
copy capture-file ftp
Upload the packet sniffing buffer to a file on a remote FTP server.
copy capture-file scp
Upload the packet sniffing buffer to a file on a remote SCP server.
copy capture-file tftp
Upload the packet sniffing buffer to a file on a remote TFTP server.
copy capture-file usb
Upload the capture file to a USB mass storage device.
copy capture-file https
Upload the packet sniffing buffer to a file on a remote HTTPS server .
copyedge capture-file scp
Upload the packet sniffing buffer to a file on a remote SCP server through Avaya SBC tunnel.
ip capture-list
Enter the capture list configuration context, create a capture list, or delete a capture list.
cookie
Set a number to identify a list (used by the rule-manager application).
ip-rule (policy, policy-based routing, packet sniffing)
Enter an ip-rule context or erase an ip-rule.
composite-operation
Create or edit a composite operation.
destination-ip
Define an equation on the destination IP.
dscp (policy-based routing, packet sniffing, VPN)
Specify the DSCP value to be set by the current IP rule.
fragment
Apply the current rule to non-initial fragments only.
icmp
Set the IP protocol to ICMP and an equation on the types of ICMP messages.
ip-protocol
Set the IP protocol.
show ip-rule
Display the attributes of a specific rule.
source-ip
Set the current rule to apply to packets from the specified source IP address.
tcp destination-port
Set the IP protocol to TCP and an equation on the destination port.
tcp source-port
Set the IP protocol to TCP and an equation on the source port.
udp destination-port
Set the IP protocol to UDP and an equation on the destination port.
udp source-port
Set the IP protocol to UDP and an equation on the source port.
name
Name a capture list.
owner
Set the name of the person or application that has created the list.
show capture
Show the sniffer status.
show capture-buffer hex
Show a hex-dump of the captured frames.
show ip capture-list
Show capture list(s).