Last Updated : Aug 10, 2016 |
Prolog information
VRRP CLI commands
Root level command
First level command
Description
interface {FastEthernet | VLAN}
See IP interface configuration
Enter the configuration context for the FastEthernet or VLAN interface
ip vrrp
Create a virtual router on an interface
ip vrrp address
Assign an IP address to a virtual router
ip vrrp auth-key
Set the virtual router simple password authentication key for the virtual router ID
ip vrrp override addr owner
Accept packets addressed to the IP addresses associated with the virtual router, such as ICMP, SNMP, and telnet (if it is not the IP address owner)
ip vrrp preempt
Configure a router to preempt a lower priority master for the virtual router ID
ip vrrp primary
Set the primary address used as the source address of VRRP packets for the virtual router ID
ip vrrp priority
Set the virtual router priority value used when selecting a master router
ip vrrp timer
Set the virtual router advertisement timer value for the virtual router ID
router vrrp
Enable or disable VRRP routing globally
show ip vrrp
Display VRRP information