set logging session

Last Updated : Nov 06, 2012 |
Manages message logging for the current console session.
Prolog information

Syntax

set logging session {enable | disable | condition {all | MsgFacility} {none | severity}}

Parameters

Parameter
Description
Possible Values
Default Value
enable
Keyword specifying to enable logging to the console session
disable
Keyword specifying to disable logging to the console session
condition
Keyword specifying to define a filter rule for logging
all
Keyword specifying to apply the filter condition to all MsgFacilities
MsgFacility
Apply the filter condition to a specific MsgFacility
arp, boot, cdr, cli, cna-tp, config, dhcp-relay, dhcpc, dhcps, dialer, dnsc, fan, filesys, ids, iphc, ipsec, isakmp, ospf, policy, ppp, pppoe, proxy-arp, qos, router, rtp-stat, saa, security, snmp, stp, supply, switchfabric, system, tftp, threshold, tracker, usb, usb-modem, vj-comp, vlan, voice, wan
none
Keyword specifying not to log messages to the console session
severity
Only log messages whose severity level is equal to or more severe than the specified level. 0 is the highest severity and 7 the lowest severity.
Use the text value or its numeric equivalent:
emergency (0)
alert (1)
critical (2)
error (3)
warning (4)
notification (5)
informational (6)
debugging (7)
6

User Level

read-write

Context

general

Example

To filter config messages for the session, sending only those config messages of alert severity or greater:
Gxxx-001(super)# set logging session condition config alert