show logging server condition

Last Updated : Apr 16, 2019 |
Displays the filter conditions that have been defined for the Syslog output sink. If an IP address or hostname is not specified, the configuration of all of the Syslog servers is displayed.
Prolog information
Metadata
Keywords:

Syntax

show logging server condition [<ip_address> | <ipv6–addr[%zone-id]> | <hostname>]

Parameters

Parameter
Description
Possible Values
Default Value
ip_address
The IP address of the Syslog server
ipv6–addr
The IPv6 address of the Syslog server
%zone-id
VLAN number
1 — 4,090
hostname
The name of the Syslog server host

User level

read-only

Context

general

Example

To display filter conditions defined for the Syslog servers.
G430-001(develop)# show logging server condition

******************************************************

Message logging configuration of SYSLOG sink ***
Sink Is Enabled
Sink default severity: Warning

Server name: 10.129.179.178
Transport Type: TLS
TLS state: connected
Port: 6514
Server facility: local7
Server access level: read-write

******************************************************

Message logging configuration of SYSLOG sink ***
Sink Is Enabled
Sink default severity: Warning

Server name: 172.16.1.235
Transport Type: TCP
TCP state: connected
Port: 514
Server facility: local7
Server access level: read-write

******************************************************

Message logging configuration of SYSLOG sink ***
Sink Is Enabled
Sink default severity: Warning

Server name: 172.16.1.234
Transport Type: UDP
Port: 514
Server facility: local7
Server access level: read-write