copy running-config tftp

Last Updated : Nov 06, 2012 |
Uploads the current configuration to a file on a TFTP server. Uncommitted changes to the configuration are included.
Prolog information
Metadata
Keywords:
To use this command, you need to have an active TFTP server. If Avaya Network Manager is running, you do not require an additional TFTP server.
Note:
After you change the configuration, run the copy running-config startup-config command to save the changes. If you do not save the changes, the device loses them when you reset.

Syntax

copy running-config tftp filename {<ip-addr>|<IPv6–addr>[%zone-id]|<hostname>}

Parameters

Parameter
Description
Possible Values
Default Value
filename
File name with full path
string
ip-addr
IPv4 address of the server
IPv6-addr
IPv6 address of the server
%zone-id
VLAN number
1 — 4,090
hostname
Hostname of the server

User level

read-write

Context

general

Example

To upload the current configuration to Gxxx.cfg on the TFTP server at IP address 135.64.10.33:
Gxxx-001(super)# copy running-config tftp Gxxx.cfg 135.64.10.33
To upload the current configuration to Gxxx.cfg on the TFTP server at IP address 2001:db8::c0a8:310a:
Gxxx-001(super)# copy running-config tftp Gxxx.cfg 2001:db8::c0a8:310a
To upload the current configuration to Gxxx.cfg on the TFTP server with the name my.tftp.server:
Gxxx-001(super)# copy running-config tftp Gxxx.cfg my.tftp.server