set digit-handling

Last Updated : Nov 06, 2012 |

Defines how inbound or outbound calls handle the reception or transmission of the dialed pattern in SLS.

Prolog information

Metadata

Keywords:

Note:

This command applies only to ISDN trunks.

Syntax

set digit-handling method

Parameter	Description	Possible Values	Default Value
method	How the inbound/outbound calls handle the reception/transmission of the dialed pattern. Enbloc requires sending the entire collected digit string in one block. Overlap sends the digits one at a time as they are collected. If you specify If you are employing TAC dialing for a trunk-group, set the transmission for outbound trunk calls to	enbloc-enbloc enbloc-overlap overlap-enbloc overlap-overlap	enbloc-enbloc

read-write

sls > trunk-group

To define that inbound and outbound calls handle reception and transmission as enbloc and enbloc respectively:

Gxxx-001 (sls-trunk-group-<tgnum>)# set digit-handling enbloc-enbloc

Send Feedback