ipv6 route

Last Updated : Nov 06, 2012 |
Adds a static route for a remote IPv6 network. Use the no ipv6 route CLI command to delete a static route.
Note:
You can specify up to three next hops.
Prolog information
Metadata
Keywords:

Syntax

ipv6 route <ipv6–addr> <prefix-length> <next-hop>[%zone-id] [<next-hop>[%zone-id]] [<next-hop>[%zone-id]]
no ipv6 route <ipv6–addr> <prefix-length> <next-hop>[%zone-id]

Parameters

Parameter
Description
Possible Values
Default Value
ipv6-addr
Address of remote IPv6 network.
prefix length
The length in bits of the network part of the address
0 — 128
next-hop
The next hop address in the network.
zone-id
VLAN number
1 — 4,090

User level

read-write

Context

general

Example

To define a static route to the network 2001:db:2179:1:: via next-hop global address 64 2001:db8:2179::2:
Gxxx-001(super)# ipv6 route 2001:db8:2179:1::1 64 2001:db8:2179::2
To define a static route to the specific host 2001:db8:2179:1::1 via next-hop with the link-local address FE80::205:32FF:FE01:C800 and zone ID "%Vlan1"
Gxxx-001(super)# ipv6 route 2001:db8:2179:1::1 64 FE80::205:32FF:FE01:C800%Vlan1